CCI PiMPro Classic 700 CALIBRATION and CCI PiMPro Classic 700 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the CCI PiMPro Classic 700 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

 
   CCI PiMPro Classic 700   Description / Specification:    
CCI PiMPro Classic 700 LTE 700L / LTE 700U PIM Analyzer

The CCI PiMPro Classic 700 is a portable Passive Intermod (PIM) analyzer that has been designed to meet the specific challenges of PIM testing both in laboratory and production environments. It covers the upper and lower 700 MHz bands, both 698-746 MHz and 746-798 MHz. The analyzer delivers maximum power of two carriers at 40 watts (40W x 2) and accuracy of intermodulation (IM) measurements, with a sensitivity of -125 dBm( -168 dBc at 20 watts). In a convenient rugged and compact portable carry-on size. The PiMPro provides precise measurement of the 3rd, 5th, 7th and 9th order of intermodulation of any system or component under high-power conditions. In addition to passive intermodulation measurements, the unit will provide VSWR and Return Loss values.
Specifications.

Band: LTE 700L / LTE 700U.
Receive Frequency: 698 - 716 MHz / 776 - 798 MHz.
Transmit Frequency: 728 - 746 MHz / 746 - 768 MHz.
RF Output Connector: 7-16 DIN Female.

Transmitter;
Frequency Accuracy: < 5 ppm.
Power Accuracy: 0.3 dB.
Frequency Step Size: 200 kHz.
Power Resolution: 0.1 dB.
Adjustable Power Range: 17 to 46 dBm × 2 (50 mW to 40 W × 2).

Receiver;
Residual Intermod Level: -122 dBm (-125 dBm Typical).
Measurement Sensitivity: -135 dBm.
Noise Floor: -136 dBm.
Reverse Power Protection: 13 dBm (20 mW) continuous.

Measurement Mode;
Measurement Method: One Port, Reverse PIM.
Real Time PIM: 3rd, 5th, 7th & 9th PIM.
Return Loss: Measured in dB.
PIM vs Time: 3rd, 5th, 7th & 9th PIM.
RX Interference: Receive Only Mode - Noise Floor Measurements.
Frequency Sweep: Frequency Response.
DAS Feature: Path Loss Characteristics.



 

Standard Calibration $890.00 *
*This is a Web introductory price for one calibration of the CCI PiMPro Classic 700. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

ATM
Asynchronous Transfer Mode (ATM) is a switching technique for telecommunication networks. It uses asynchronous time-division multiplexing, and it encodes data into small, fixed-sized cells. This differs from networks such as the Internet or Ethernet LANs that use variable sized packets or frames.

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Please contact us for your CCI PiMPro Classic 700 CALIBRATION and/or CCI PiMPro Classic 700 LTE 700L / LTE 700U PIM Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: